Features
:
Automatic cap sealing Is designed for those bottle
mouths to be sealed with aluminum cap and/or spiral-type
cap.
It is also possible for sealing with plastic screw
cap and the sealing requirements can be adjusted according
to the materials of the cap.
A safety equipment is attached to this machine, which
will automatically stop its operating in case of any
fell down of battle, Improper positioning of the bottle
to be capped, or of the manual opoeration is ntruded.
The soft device permits to reduce the friction loss
of machines, thus to prolong the service life of this
machine.
When specification of the cap is changed, only to
replace the star wheel required,
the height can be also adjusted according to that
of the bottles to be capped. It is very easy to wash
and clean.
A stepless speed variation motor is used for the operation
speed can be adjusted as desired.
It operates independently, or it can be connected
with the Automatic Flillng Machine & Automatic
Labeller Machine for a consisted intergrated automatic
production.
This machine adopted brake clutch and index therefore
bottle intake, positioning
and cap sealing all are automatic operation and positioning
in the line to meet with G.M.P standard.
Models
AC-80-RA
AC-80-ST
AC-80-PP
Sealing
Type
Roll-on
aluminum
Screw
type
Press-on-Plastic
Speed
30~60
30~60
30~60
Motor
Power
1
HP
1
HP
1
HP
Source
Power
220/single
phase V, 60/50Hz
220/single
phase V, 60/50Hz
220/single
phase V, 60/50Hz
Maching
Dimension
2200Lx900Wx1750H(mm)
2200Lx900Wx1750H(mm)
2200Lx900Wx1750H(mm)
Machine
Weight
500kgs
500kgs
500kgs
Air
Press
5-6
kg
5-6
kg
5-6
kg
Vacuum
press consumption (Screw type)
5
L/min
5
L/min
5
L/min
*Specifications are subject
to change without notice*
