Feature:
1. Adopt single axle adjusting piston, the request
filling volume can be adjusted
quickly and precisely.
2. The part of piston which contacts with the liquid
is made of fine
ceramics. Can avoid the contamination and
meet the GMP standard.
3. Automatic feeding bottle, positioning and operation
are controlled automatically.
4. The automatic capping is designed according to
the sealing mouth of screw
cap. The fastening (sealing) range
can be adjusted according to the material
of cap.
5. With safety device, machine will stop automatically
when bottle fell down or
not in correct position during
use the hand-wheel.
6. When specification of the bottle is changed. It
only needs to change starwheel.
The height can be adjusted also.
It is very easy to wash & clean.
7. Adopt stepless speed variation motor, the operation
speed can be adjusted
freely.
8. It can be run individual or connected with automatic
labelling machine and
automatic cartoning machine to
complete the whole line running in one line
production.
9. The Monoblock machine is designed for automatic
filling, inner plugging and
over-capping onto small containers,
most suitable for eye-drop and small
volume injection liquid production
to meet with GMP standards.
Application:
Suitable for eye-drop bottle, cosmetic, pharmaceutical
chemical liquid etc filing,
plugging and over-capping operations.
Specification:
Model Type: AFC-150
Filling Volume: 2c.c.~20c.c.、15c.c.~40c.c.、30c.c.~60c.c.、50c.c.~100c.c.
Speed: 35 - 70- bottles/min.
Motor: 1 HP & 60W
Air Pressure: 4 - 6 kg (Prepared by buyer)
Vacuum Press Consumption: 220 L/min
Electric Power: 220V, 50/60 Hz , single phase
Machine Dimension: (L)1780mm x (W)1675mm x (H)1700mm
Machine Weight: 950 kgs
Optional Bottle Feeding Devices:
a). Turn-Table - For Glass Vial or Plastic Bottle.
(Maximum: 60Ø x 100H
, 26Ø x 56H)
b). Vibrator- For Plastic Bottle. (Maximum: 25Ø
x 55H , 13Ø x 39H)
c). Nitrogen filling.
*Specifications are subject
to change without notice*
